GU10 / MR16 architectural downlight housings
Plaster-in, minimal trim, reflector cup and multi-head housings — one magnetic snap-in socket accepts a GU10 lamp head, an MR16 retrofit lamp or a COZLED COB module. Specify the housing once; change the light engine whenever the project needs it.
Browse by housing type
Nine product families, 96 models — every one built around the same magnetic module socket so a single ceiling detail can be repeated across recessed, surface and pendant mounting.

Plaster-in Housing
Trimless frames skimmed into the plasterboard — nothing visible but the aperture.
15 models
Minimal Trim Housing
Slim bezel, 2 mm rim, round or square, down to a Ø65 mm cut-out.
20 models
Reflector Cup Housing
Deep interchangeable cup for glare control, six reflector finishes.
4 models
Recessed Mounting Box
Integrated rear box for concrete and insulated ceilings.
8 models
Multi-Head Modular Housing
2, 3 or 4 modules in one frameless frame, each an independent socket.
27 models
Surface & Pendant Housing
The same socket on the ceiling: Ø78 mm surface bodies and pendants.
9 models
GU10 / MR16 Spotlights
Complete fixtures with the GU10 lamp head included.
8 models
AR111 Luminaires
Deep AR111 projector downlights for retail and gallery accent.
1 model
Magnetic LED Modules
Snap-in COB engines, 7–18 W, CREE or CITIZEN, 10°–60°.
4 modelsHow the snap-in system works
The housing carries the mechanics and the ceiling detail. The light engine is a separate, magnetic part.
Specify the housing
Choose trimless, slim bezel, reflector cup, mounting box, multi-head, surface or pendant — in the cut-out your ceiling already has.
Snap in the module
GU10 lamp head, MR16 lamp or a magnetic COB module. No tools, no rewiring, no second hole.
Tune the light
Swap beam angle, colour temperature or reflector cup finish on site — the ceiling stays untouched.
Upgrade later
When the tenant changes or a new scheme needs more output, the same housing takes a new engine.
Featured models
One model from each family — plaster-in, minimal trim, reflector cup, mounting box, multi-head, surface, spotlight, AR111 and the magnetic module. Every product page carries sizes, cut-out, lamp compatibility and packing data.
-
AR111 LuminairesCD015-AR111 AR111 Projector Downlight
-
GU10 / MR16 Spotlights1055S Surface-Mounted Mini GU10 Spotlight
-
Surface & Pendant HousingSDL003-C Surface Downlight Housing (MR11)
-
Magnetic LED ModulesD09-M Magnetic Snap-in LED Module Kit
-
Multi-Head Modular HousingDL013-E-2 2-Head Modular Downlight Housing (GU10/MR16)
-
Recessed Mounting BoxDL013-E 85mm Recessed Mounting Box Downlight Housing (GU10/MR16)
-
Plaster-in HousingDL013-D 85mm Frameless Plaster-in Downlight Housing (GU10/MR16)
-
Reflector Cup HousingDL013-C 75mm Reflector Cup Downlight Housing (GU10/MR16)
-
Minimal Trim HousingDL013-B1 75mm Slim Bezel Downlight Housing (GU10/MR16)
Project quantities, OEM packaging, custom RAL
Send us your ceiling detail, cut-out and lamp specification. We quote plaster-in, minimal trim and multi-head housings with the module kit matched to your beam angle.
Request a quote







